News

ODM/Patent Products

News

We are glad to share with you about the results of our work, company news,and give you timely developments and personnel appointment and removal conditions.

Application range of steering knuckle
The steering drive shaft is widely used in automobiles. In cars with front-engine rear wheels or all-wheel drive, due to the deformation of the elastic suspension, the relative position of the axis of the transmission or transfer output shaft and the drive axle input shaft often changes, so the cross-shaft steering drive shaft is generally used. In the steering drive axle, the angle between the inner and outer half shafts changes with the driving needs, and the constant speed steering drive shaft is often used at this time. When the rear drive axle is an independent suspension, the steering drive shaft must also be used.
2021-09-30
Read More
Different kinds of plastic injection molds
Injection molding is a manufacturing process for producing parts by injecting molten material into a mold. Plastic Injection Molding is one of the most frequently used manufacturing processes for creating plastic parts. Thanks to its high-precision, repeatability, and cost efficiency at scale, plastic injection molding is used for a variety of products and parts from the smallest insert up to large automotive & aerospace parts.
2021-09-14
Read More
Different types of stamping part
Stamping parts are the basic components for almost all of industrial sections. Stamping parts fabrication processes including material blanking, stamping and surface treatment. Almost all the metal material including steel, copper, aluminum etc. can be stamped. The surface treatment of stamping parts would be in accordance with the client’s requirements
2021-09-06
Read More
The design and production process of the plastic injection mold
Injection molding is a manufacturing process for producing parts by injecting molten material into a mold. Plastic Injection Molding is one of the most frequently used manufacturing processes for creating plastic parts. Thanks to its high-precision, repeatability, and cost efficiency at scale, plastic injection molding is used for a variety of products and parts from the smallest insert up to large automotive & aerospace parts.
2021-09-02
Read More
After plastic injection molding, what are the factors that affect the cooling rate of the product?
After plastic injection molding, it is mainly the wall thickness of the plastic product. The greater the thickness of the product, the longer the cooling time. Generally speaking, the cooling time is approximately proportional to the square of the thickness of the plastic product, or proportional to the 1.6th power of the largest runner diameter. That is, the thickness of the plastic product is doubled, and the cooling time is increased by 4 times.
2021-08-27
Read More
Basic introduction of steering knuckle
The steering knuckle is one of the main parts on the steering axle of the car, which can make the car run stably and sensitively transmit the driving direction. The function of the steering knuckle is to bear the load of the front of the car, support and drive the front wheel to rotate around the king pin to turn the car. In the driving state of the car, it is subjected to variable impact loads, therefore, it is required to have high strength.
2021-08-21
Read More