ODM/Patent Products

Industry news

  • Filling is the first step in the entire injection cycle process. The time starts from when the mold is closed and the injection is started until the mold cavity is filled to about 95%. In theory, the shorter the filling time, the higher the efficiency of plastic injection molding; but in actual production, the molding time (or injection speed) is restricted by many conditions.

    2021-08-04

  • The selection of shaft parts materials is mainly determined according to the strength, rigidity, wear resistance and manufacturing process of the shaft, and strives to be economical and reasonable. 1. Ordinary carbon steels such as Q235 and Q255 can also be used for shafts with small or less important loads, such as our wheelie bin axles;

    2021-07-31

  • The first step is to wipe clean the adhesive area of the front windshield. The second step is to clean the surface of the base, and evenly spread the base glue on the glued surface.

    2021-07-28

  • The stamping process has a wide range of applications. In all sectors of the national economy, there are almost all stamping products. For example, automobiles, airplanes, tractors, electrical appliances, motors, meters, railways, post and telecommunications, chemicals, and light industrial daily products all account for a considerable proportion.

    2021-07-22

  • When CNC machining cylinder parts, the air pressure detected by the cylinder head cannot be accurately controlled. The air pressure sometimes exceeds the test pressure, resulting in damage to the cylinder head due to excessive pressure. In addition, when the air pressure is too large, it is easy to cause the pressure in the injector mounting hole. The copper sleeve jumped out, causing injury or accident.

    2021-07-19

  • Cold chamber high pressure die casting technology is an ideal choice for the production of various aluminum and magnesium automotive castings, such as structural parts such as engine block, gearbox housing, oil tank, engine support and straddle beam. It is widely used in other fields to produce various components from the simplest (lighting components) to the most demanding (such as aero engine parts) applications.

    2021-07-13

 ...45678 
info@auwell.com.cn
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept